New software version Met87_ENU-1.0.0.0.zip of the METEOR87 ECU

SECURE METHOD OF ECU UPGRADE

WARNING LEVEL : NORMAL



NEW FEATURES AND IMPROVEMENTS

The Meteor87 owns the same features than the Meteor86
• The difference between the Meteor87 and the Meteor86 is that the Meteor87 has an auxiliary Peak and Hold command.
This Peak and Hold command allows better management of devices with high current command, such as fuel high pressure pumps for direct injection.


CONTENT Meteor87 Tunewares:
• System V100 (new – 3rd 07/2024)
• Throttle/RPM: V100 (new – 3rd 07/2024)
• Pressure/RPM and turbo: V100 (new – 3rd 07/2024)

Documentations in English:
• Meteor87 tuning software pack: 49 separate documents, each for one specific fonction of the ECU, with many didactic examples (new – 3rd 07/2024)
• Ethanol complete tuning and Hard cut rpm limiter documents
• Meteor87 installation: V1.00 – with commands of ignition modules (new – 3rd 07/2024)
• Meteor87 options installation: V1.00 – sequential gearboxes, fly by wires, bang-bang, Vanos BWM … (new – 3rd 07/2024)

Nota:
• Does not contain Winjall software. Winjall must first be downloaded and installed apart.
• Does not contain the sensors convertion maps nor the actuators command maps. These maps have to be downloaded and installed apart with the pack SensAct.


LAST SECURITY CRITICAL MODIFICATION DONE

Not needed.

NEEDING Winjall V9.9.0.0 (see specific downloading)

V9.9.0.0 or later version of Winjall software must mandatory have been installed first.

HOW TO UPGRADE TUNEWARES

• Download new .zip Meteor87 software pack file and save it in a directory on your hard disk.
• If you have already installed a former version of this pack, you have to usinstall it before installing this new one:
In Windows XP, execute ‘Start/Parameters/Configuration/Add-Remove programs’.
In Windows 7 and latter versions, execute ‘Start/Parameters/Configuration/Programs and features’.
In the software list, select Meteor87 then ‘Uninstall’. Follow uninstall instructions.
• With the files explorer, double click on the downloaded software pack .zip file, then double click on Setup. At the question on files extraction, answer ‘Extract All’.
• If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).


VERSIONS HISTORY
(Improvements are added from a version to the next one)

Throttle/RPM : V100 (System V100)
Pressure/RPM : V100 (System V100)

Start version